This is a snap fit double wiper that when used with RS129 will almost guarantee leak free operation
This seal profile is designed with interference on the OD, ensuring a good static fit is achieved. This prevents the ingress of contamination via the OD. The wiper lip is designed in such a way, that it supports the recirculation of the oil film back into the cylinder, whilst excluding any contamination. The lip on the fluid side keeps the remaining oil film to a minimum.
Standard materials include PU, NBR, FPM, EPDM, PTFE, MVQ. Other materials available upon request
All information is for guidance only. Further testing specific to your application is always recommended.
|Temperature||Speed max||Pressure max||Seal Material||Other Material|
|-30 to 105°C||4 m/s||N/A||PU|
|-30 to 105°C||4 m/s||N/A||PU MoS2|
|-25 to 100°C||4 m/s||N/A||NBR|
|-25 to 150°C||4 m/s||N/A||HNBR|
|-20 to 210°C||4 m/s||N/A||FPM|
Material DatasheetsV-PTFE NBR MVQ HPU FPM EPDM ALL DATASHEETS